IO Controllers › Serial › SATA RAID Controller Card

Port Multiplier FIS-based and Command-based switching supported Simple HyperDu... Port Multiplier FIS-based and Command-based switching supported Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only) Compliant with PCI Express 2.0 standards 4 AHCI SATA III (6Gbps) ports through PCI Express x2... more

NOTE: Before purchasing this product or your M.2, please confirm if it is a SA... NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support; if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port... more

Storage controller (RAID) - 4 Channel - SATA 1.5Gb/s - 150 MBps - RAID 0 1 10 ... Storage controller (RAID) - 4 Channel - SATA 1.5Gb/s - 150 MBps - RAID 0 1 10 - PCI more

We combine an advanced switched RAID architecture StorSwitch with SATA drives ... We combine an advanced switched RAID architecture StorSwitch with SATA drives to deliver a highly scalable hardware RAID storage solution. The point-to-point architecture gives full bandwidth to each drive so performance is not compromised as you... more

Manufacturer part number: ACC7231 Specifications •Fully Compatible with PCI ... Manufacturer part number: ACC7231 Specifications •Fully Compatible with PCI Express 1.0a Specifications •Compliant with Serial ATA II specifications •Supports NCQ •Supports two independent Serial ATA channels •Supports SATA I and SATA II... more