Hand Tools › Zinc › Flat

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phill... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size 3/8 In.-16, Fastener Length 1 in, Head Width 0.717 in, Head Height 0.23 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards ASME... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Materia... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 1 in, Inside Diameter 1.063 in, Outside Diameter 2 in, Maximum Thickness 9/64 in, System... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slott... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size 1/2 In.-13, Fastener Length 1 1/4 in, Head Width 0.815 in, Head Height 0.815 in, Drive Size Not Applicable, Tensile Strength 60,000 psi, Dimensional... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phill... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size #10-32, Fastener Length 1 1/2 in, Head Width 0.362 in, Head Height 0.116 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slott... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size #6-32, Fastener Length 4 in, Head Width 0.262 in, Head Height 0.083 in, Drive Size Not Applicable, Tensile Strength 60,000 psi, Dimensional Standards ASME... more

USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1, Materia... USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 1/4 in, Inside Diameter 0.313 in, Outside Diameter 3/4 in, Maximum Thickness 9/64 in,... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phill... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size #8-32, Fastener Length 3/4 in, Head Width 0.312 in, Head Height 0.1 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3,... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slott... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size M6x1.00, Fastener Length 25 mm, Head Width 11.3 mm, Head Height 3.3 mm, Drive Size Not Applicable, Tensile Strength 60,900 psi, Dimensional Standards DIN... more

Machine Screws, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phil... Machine Screws, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size M4x0.70, Fastener Length 60 mm, Head Width 7.5 mm, Head Height 2.22 mm, Drive Size #2, Tensile Strength 60,900 psi, Dimensional Standards DIN 965A, Pack... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slott... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size 1/4 In.-20, Fastener Length 1/2 in, Head Width 0.477 in, Head Height 0.153 in, Drive Size Not Applicable, Tensile Strength 60,000 psi, Dimensional... more

Flat Washer, Flat Washer Type Standard, Dimensional Standards AMPG 2001 FL.06,... Flat Washer, Flat Washer Type Standard, Dimensional Standards AMPG 2001 FL.06, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 7/8 in, Inside Diameter 0.938 in, Outside Diameter 1 3/4 in, Maximum Thickness... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Materia... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 3/4 in, Inside Diameter 0.813 in, Outside Diameter 1 15/32 in, Maximum Thickness 1/8 in,... more

Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Torx(... Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Torx(R), Thread Size #6-32, Fastener Length 1 in, Head Width 0.262 in, Head Height 0.083 in, Drive Size T10, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Thread... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Materia... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 1 1/8 in, Inside Diameter 1.188 in, Outside Diameter 2 1/4 in, Maximum Thickness 9/64... more

Flat Washer, Flat Washer Type Standard, Dimensional Standards AMPG 2001 FL.06,... Flat Washer, Flat Washer Type Standard, Dimensional Standards AMPG 2001 FL.06, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 9/16 in, Inside Diameter 0.594 in, Outside Diameter 1 11/64 in, Maximum... more

USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1, Materia... USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 3/8 in, Inside Diameter 0.438 in, Outside Diameter 1 in, Maximum Thickness 9/64 in,... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Materia... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 1/2 in, Inside Diameter 0.531 in, Outside Diameter 1 1/16 in, Maximum Thickness 3/32 in,... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1 Type A N... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1 Type A Narrow, SAE Standard, Material Steel, Material Grade/Class Grade 8, Finish Zinc Yellow, For Screw Size 1 1/2 in, Inside Diameter 1.625 in, Outside Diameter 3 in, Maximum... more

SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Materia... SAE Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Through Hardened, Finish Zinc Yellow, For Screw Size 9/16 in, Inside Diameter 0.594 in, Outside Diameter 1 3/16 in, Maximum Thickness 3/32... more

USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1 Type A W... USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1 Type A Wide, USS Standard, Material Steel, Material Grade/Class Grade 8, Finish Zinc Yellow, For Screw Size 7/8 in, Inside Diameter 0.938 in, Outside Diameter 2 1/4 in, Maximum... more