SmallParts M3.1x44.4 Viton O-Ring, 75A Durometer, Round, Black, 44.4 mm ID, 50.6 mm OD, 3.1 mm Width

Pack of 2 - MPN: VIFM31X444
Where to buy
Current Location: Ashburn, VA (20147)
Store Store Rating Price
Best Price
Tax: None
Shipping: $5.03
See It Now
Product Details
Description
This metric O-ring is made of black Viton and has a durometer of 75A, a round cross-section, and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing applications, this Viton O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has heat, fuel, and chemical resistance and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane). It works well in high vacuum environments and is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568A dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.
Summary
Product Title SmallParts M3.1x44.4 Viton O-Ring, 75A Durometer, Round, Black, 44.4 mm ID, 50.6 mm OD, 3.1 mm Width
Manufacturer SmallParts
Lowest Price $9.52 from Amazon.com
Today's Average: $14.55
Today's Lowest: $14.55
Compare Prices
Product Details
Description
This metric O-ring is made of black Viton and has a durometer of 75A, a round cross-section, and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing applications, this Viton O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has heat, fuel, and chemical resistance and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane). It works well in high vacuum environments and is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568A dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.
Summary
Product Title SmallParts M3.1x44.4 Viton O-Ring, 75A Durometer, Round, Black, 44.4 mm ID, 50.6 mm OD, 3.1 mm Width
Manufacturer SmallParts
Lowest Price $9.52 from Amazon.com
Additional Specifications
Parent Retsku: B005RVKAH0




Copyright ©2015 PriceGrabber.com, Inc. All Rights Reserved

Show Survey

Feedback

We want to improve your experience!

Please take a moment to answer the questions below:

How likely would you be to recommend PriceGrabber to a friend or colleague?

Not likely at all Neutral Extremely likely

What is your main purpose for visiting PriceGrabber today? (Optional)

What areas can PriceGrabber improve to better serve your needs? (Optional)

How easy was it to find what you were looking for? (Optional)

Gender (Optional)

Age (Optional)

Annual Income (Optional)

Comments (Optional)

Authorized Retailers Offer