Multi-purpose treasure detector specialized to detect gold Packed with features to find small gold and silver targets at extreme depths V-Break variable breakpoint tone discrimination control system Separate controls over signal gain and threshold Sophisticated manual ground balancing system Computerized Ground Grab - works with ground balance system for deep ground penetration Large LCD screen with Target Identification Display for great target resolution Teknetics 11'' DD Elliptical waterproof search coil Two tone V.C.O. audio in all metal and discrimination modes - indicates probable depth and target composition If gold is what you are looking for, the Teknetics G2 Metal Detector has the specialized detecting performance you want. Transmitting at 19 kHz with two microprocessors, the G2 is a multipurpose gold relic, coin, and jewelry detector that finds extremely small gold and silver targets at extreme depths. Specialized to boost sensitivity to low conductivity metals like gold, this detector helps you filter out signals from unwanted metals with separate controls over signal gain and threshold, and the unique V-Break variable breakpoint tone discrimination control system. Large LCD screen with Target Identification Display on the pistol mount control box displays a measure between 1-99 for ultimate target resolution. The G2 also comes outfitted with the Teknetics 11'' DD Elliptical waterproof search coil to cover a larger area with each pass than coils typically found on gold prospecting detectors, expanding this detector's versatility as an all-purpose treasure detector. Detector also features Computerized Ground Grab and a sophisticated manual ground balancing system for deep ground penetration, continuous ground condition readouts, and two tone V.C.O. audio in all metal and discrimination modes to indicate probable depth and target composition. Lightweight 4 lbs. Runs on one 9V battery (not included). Made in USA.